Installing TAPI driver (TSP)
The PBX must be connected with a server PC via a TCP/IP network. The TAPI driver (TSP) that belongs to the PBX must be installed on this server PC from the Auerswald Mega Disk.
Important: If you want to integrate the LAN-TAPI into an existing network, please contact the system administrator responsible for this. Making changes to an existing network may cause considerable functional disturbances.
Note: You can find the current version of the driver on the Internet (see Auerswald: Auerswald Service Portal, FONtevo: FONtevo Support).Requirements:
• A driver file (*.exe) in its current version saved on a data storage device (PC)
• Server PC that fulfils one of the following minimum requirements:
- Windows 7 (32-/64-Bit) |
- Windows Server 2008 und Windows Server 2008 R2 |
- Windows 8/8.1 (32-/64-Bit) |
- Windows 10 (32-/64-Bit) |
- Windows Server 2012 und Windows Server 2012 R2 |
- Windows Server 2016 |
1.Start driver file (*.exe) on the server PC.
The TAPI driver installation is started.
2.Follow the installation by clicking Next.
3.Depending on the driver version, the driver may need to be activated at this point. If you do not want to activate it yet, click the Activate later button.
4.In the IP address of the PBX entry field, enter the IP address of the PBX. Enter the network port of the TAPI server in the Port entry field. Enter the password for the network connection of the TAPI server in the Password and Repeat password entry fields. Click OK.
5.Click Close.
6.Restart the PC.