Reachability
Proceed as follows:
• Separately for subscribers
• Using the Configuration Manager
• Subscriber-related (page Subscriber (scr.) > Properties)
SUBSCRIBER
Select the subscriber you want to display/configure.
• Function-related (page Subscriber (scr.) > Function overview)
Configure
Opens the configuration of the single function for all subscribers.
Important: The settings done are only valid on the condition that they are not overridden by a profile. The simultaneous display takes place only on page Subscriber (scr.) > Properties under Overridden by profile in configuration.
Note: [Name configuration] ...: In the displayed configuration, the function is overridden by the displayed setting. Configuration using the Configuration Manager (page Subscriber (scr.) > Profiles > ...) Note: not overridden by a profile: The function is currently not overridden by a profile. Note: (not profile-controlled): The function can not be overridden by a profile.Call waiting
You will be notified of any incoming calls if already on another call.
Do-not-Disturb
Callers are rejected.
Call deblocker (incoming)
Requirements:
• Configured call deblocker
-Using the Configuration Manager (page User data > Special numbers)
The do-not-disturb function does not apply to callers who use one of the phone numbers entered in the selected call deblocker.
Call restrictor (incoming)
Requirements:
• Configured call restrictor
-Using the Configuration Manager (page User data > Special numbers)
A caller, who transmitted one of the phone numbers entered in the selected call restrictor or no number, is rejected.
Follow-me | Destination number:
Internal and external calls to the subscriber are forwarded to the entered destination number.
Multi-path Call Forwarding / FMC
Multi-path call forwarding behaviour | Destination number
• Internal and external calls directed to the subscriber are also signalled at the entered destination number
• CFNR is executed
• Calls directed to a group are not considered
FMC behaviour | Destination number
• On a second call, the called subscriber is busy
• The multi-path call is not executed
• CFB is executed
• an answering machine at the 2 nd B-channel (ISDN) ist not called
Call Forwarding | Settings | only external calls
External calls to the subscriber are forwarded. Internal calls are not forwarded.
Call Forwarding | Settings | Cascading
If call forwarding has been configured for the internal destination of an existing call forwarding, it is possible to reroute already forwarded calls (cascading).
Calls also will be rerouted to the new call forwarding destination. During cascading, the PBX memorises the subscribers who have already been called for this call. If the subscriber is the destination of a call forwarding again, the call ends with the previous destination.
The caller hears the dial tone until the call is accepted. If the destination is busy or the maximum call duration has been reached, a busy signal is issued.
Note: When switched off, cascading does not take place. Calls end with the entered destination.Call Forwarding | Settings | CF for group calls
Calls directed to a group in which the subscriber is logged in as incoming will be forwarded to the CF destination of the subscriber.
Call Forwarding | CF immediately | Destination number:
Internal and external calls to the subscriber are forwarded immediately to the entered destination number.
Call Forwarding | CF on busy | Destination number:
Internal and external calls to the subscriber are forwarded on busy to the entered destination number.
Call Forwarding | CF on no reply | Destination number:
Internal and external calls to the subscriber are forwarded after the entered delay time to the entered destination number.
Delay time for CF on no reply
Call forwarding after the waiting time entered here in sec.