Buch1 > Using the Configuration Manager > Subscriber (scr.) > Phone numbers > Management Subscriber
Management Subscriber
Proceed as follows:
• Using the Configuration Manager (page Subscriber (scr.) > Phone numbers)
Phone number
This is an internal number. You can select any of the numbers in the internal supply of phone numbers. This number is then used for distributing calls and can be called directly by another internal subscriber.
* Note: A number cannot be allocated twice.
* Note: Using numbers with few digits (two- or three-digit numbers) inevitably restricts the possible supply of numbers that require more digits. For example, if the phone number 12 is assigned, the phone numbers 120 to 129 and 1200 to 1299 are no longer available.
* Note: The default exchange line access number on the PBX is 0 in the factory settings. However, this can be changed. Note that changing the exchange line access number restricts the phone numbering plan.
* Note: The internal number entered here needs to be entered in the ISDN device or in the system phone as the (first) MSN. Also on an ISDN device, make sure that the phone number is transmitted to the PBX.
Name
Freely selectable name. This name is used to identify the subscriber within the PBX and the connected system phones. The name can also be transferred to the VoIP end devices via LDAP server.
Module | Port
Module and port to which the end device (e. g. phone) is connected.
Device type
Device type depending on the end device connected.
Analogue end devices
Phone
analogue phone, analogue modem
Answering machine
analogue answering machine
Fax machine
analogue fax machine
Door terminal
analogue door terminal, selection deletes the subscriber and opens Devices > Device wizard for configuration of a door terminal
Announcement output
analogue announcement output, selection deletes the subscriber and opens Devices > Device wizard for configuration of an announcement output


ISDN end devices
ISDN system phone
System phone 1200/1400/1600/2600
ISDN phone
ISDN phone in compliance with the Euro ISDN Standard (DSS1)
ISDN PC controller
ISDN PC controller in compliance with the Euro ISDN Standard (DSS1)
Fax machine
ISDN fax machine in compliance with the Euro ISDN Standard (DSS1)


VoIP end devices
COMfortel IP
COMfortel 1400 IP, COMfortel 2600 IP, COMfortel 3200, COMfortel 3500, COMfortel 3600 IP
COMfortel 1200 IP
COMfortel 1200 IP
Standard VoIP phone
Standard VoIP end device (SIP) from other manufacturers, soft phone (SIP)
Handset on COMfortel WS-IP
Handset (e.g., COMfortel M-100/200/210/300/310) on a COMfortel WS-400 IP or COMfortel WS-650 IP
Handset on COMfortel WS-500
Handset COMfortel M-510/520/530 on a COMfortel WS-500S or WS-500M
COMfortel C-400
Conference phone COMfortel C-400
Door terminal
VoIP door terminal, selection deletes the subscriber and opens Devices > Device wizard for configuration of a door terminal
Property | Configure
Opens the configuration of the subscriber.
Filter:
The list of subscribers is filtered according to the entered or selected value for Phone number, Name or Module.
 New
Adds a new subscriber. You must then make the settings for this new subscriber.
* Further help under Add Subscriber
 Delete
Entries marked in the list are deleted.
* Note: If a handset of the device type COMfortel M-5x0 is deleted as a subscriber, this is also removed in the base station in which it was configured.