Number Presentation (outgoing)
Proceed as follows:
• Separately for VoIP providers
• Using the Configuration Manager (page Public switched tel. networks > Voice over IP (VoIP page) > Provider > Configure)
Note: You can obtain the data for the settings either directly from the VoIP provider or from suitable lists in the Internet.Requirements:
• For entering a URL: configured DNS server
• For using a STUN server: IP operating mode IPv4
PROVIDER
Select the provider to be displayed/configured.
Format of called phone number
Format in which the VoIP provider requires the phone number of the destination, to enable the VoIP provider to transfer the call.
Country code with leading zeroes
The destination phone number is transmitted from the PBX to the VoIP provider with the entire country code (e.g. 0044).
Country code with leading + sign
The destination phone number is transmitted from the PBX to the VoIP provider with the entire country code in mobile telephony format (e.g. +44).
Country code without leading zeroes
The destination phone number is transmitted from the PBX to the VoIP provider with a shortened country code, without the international prefix (digit), (e.g. 44).
Without country code
The destination phone number is transmitted from the PBX to the VoIP provider without its own country code but with the local area code (e.g. 05306).
Send as dialled
The PBX transmits the destination phone number to the VoIP provider, as dialled.
Note: The PBX automatically converts the phone numbers dialled into this format for calls made via the VoIP provider. Note: If prefixes are necessary for conversion, for dialling a number without prefixes, the prefixes set for the account are used (Public switched tel. networks > Exchange line request).Format of own phone number
Format in which the VoIP provider requires the phone number that is to be transmitted.
Country code with leading zeroes
Your own external phone number, that is to be transferred,is sent to the VoIP provider with the entire country code (e.g. 0044).
Country code with leading + sign
Your own external phone number, that is to be transferred, is sent to the VoIP provider with the entire country code in mobile telephony format (e.g. +44).
Country code without leading zeroes
Your own external phone number, that is to be transferred, is sent to the VoIP provider with a shortened country code (without the international prefix (digit, e.g. 44).
Without country code
Your own external phone number, that is to be transferred, is sent to the VoIP provider without the country code, but with the local area code (e.g. 05306).
Only MSN or main number and DDI number
Your own external phone number, that is to be transferred, is sent to the VoIP provider without prefixes (e.g. 920082 or 92008279).
Only DDI number (only possible for PTP connection)
Your own external phone number, that is to be transferred, is sent to the VoIP provider without prefixes or the PBX base number (e.g. 8279).
Area code without leading zero
Your own external phone number, that is to be transferred, is sent to the VoIP provider with the local area code, but without a leading zero (e.g. 5306).
Note: The PBX checks whether any of the specified phone numbers are to be transferred, and if so which ones (Subscriber (scr.) > Properties > Exchange line settings). Note: The transmitted phone number is automatically converted into the selected format. If prefixes are necessary for converting your own phone number, the prefixes set for the account are used (Public switched tel. networks > VoIP > Accounts > Configure). For outgoing dialling, the global settings under Public switched tel. networks > Exchange line request are used. For incoming calls, the local area code of the account may be added.Format of CLIP no screening Phone Number
Requirements:
• CLIP no screening for outgoing calls enabled (VoIP > Accounts > Configure > LOCATION/MISCELLANEOUS > Number Presentation)
Format in which the VoIP provider needs the telephone number to be transferred.
Method of number presentation suppression
Requirements:
• The VoIP provider supports the number presentation suppression service attribute
• Number presentation suppression is enabled for the subscriber
Area of the From header in which the VoIP provider expects to receive the number presentation suppression.
No display text
If number presentation suppression is switched on, an empty display text is sent in the From header.
Anonymous
The sent display text in the From header is "anonymous" if number presentation suppression is switched on.
User Anonymous
If number presentation suppression is switched on, both the display text and the User name section in the From header contain "anonymous".
Note: Number presentation suppression in accordance with RFC 3325, by using a privacy header, is also used automatically.