Management COMfortel WS-500

Buch1 > Using the Configuration Manager > Subscriber (scr.) > COMfortel WS-500x > Management COMfortel WS-500

Proceed as follows:

• Using the Configuration Manager (page Subscriber (scr.) > COMfortel WS-500x > COMfortel WS-500)

Requirements:

• Base station is configured with the MAC address via the PBXBasisstation (use of provisioning). Or the base station is configured with the MAC address via the corresponding Web Configurator (see Intrsuctions of the base station)

• Knowledge of the MAC address of the base station (sticker on the back of the device)

• Base station is configured with the MAC address via the PBX (manually or via provisioning)

Note: At the PBX, only base stations are configured for which the device role "DECT Manager and Integrator" is enabled.Base stations with the role "Base station" are not configured in the PBX but for multi-cell operation at a previously determined base station with the role "DECT Manager and Intergrator".

For more information about role distribution and base station management, see the Instructions of the base station.

MAC address

Required for all transactions between PBX, base station and handset and for the assignment of provisioning data. The address is also required for base station synchronisation in the Integrator/DECT manager.

Name of the base

Freely selectable name. This is used to identify the base station in the PBX and in the Integrator/DECT Manager.

Handsets (IPUI)

Registered handsets at this base station with the following information (left to right):

• Handset IPUI

• Handset phone number

• Handset name

Note: The name can be changed via the page Subscriber (scr.) > Phone numbers, the IPUI or the base station can be changed via the page Subscriber (scr.) > COMfortel WS-500x > COMfortel M-5x0.

Provisioning file

The provisioning file displayed here gives the base station the required configuration.

Configurator of the base

Link to the Web Configurator of the base station for further configuration.

Properties | Configure

Opens the configuration of the base station.

Further help under Settings COMfortel WS-500

Note: For settings that are required but not offered here, you can open the Web Configurator of the base station via the adjacent link under Configurator of the base.

New

A new base station is added. The settings must then be made.

Further help under Settings COMfortel WS-500

Delete

Deletes the entries marked in the list.