Configuring VoIP Door Terminal
Proceed as follows:
•Using the Configuration Manager (Périphériques > Assistant de périphériques > Configurer)
Numéro de téléphone
Internal number, freely selectable from the numbers in the internal phone number supply. This number can be called directly by an internal subscriber. When put together with the numbers of the door bell buttons, this creates 3 to 4-digit phone numbers. (Select Périphériques > Assistant de périphériques > Nouvelle)
Note: Double allocation of a number is not possible.Note: Using numbers with few digits (two or three-digit numbers) inevitably restricts the possible supply of numbers requiring more digits. For example, if the number 12 is assigned, the numbers 120-129 and 1200-1299 will no longer be available.Note: The default exchange line access number on the PBX is 0 in the factory settings. However, this can be changed. Note that changing the exchange line access number restricts the dial plan.Mot de passe SIP
Enter the SIP password required by the connected device.
Configuration IP
Adresse IP
Enter the IP address required by the connected device. Possible entries: IP address with a range of 0 to 255 (example: 192.168.0.240).
Port
Enter the port required by the connected device. Possible entries: 1 to 65535.
Nom d’utilisateur
Enter the user name (authentication data to control the relays).
Mot de passe
Enter the password (authentication data to control the relays).
Relay X, Switch input X
Nom
Enter the names of the relays and switch inputs.
Numéro de téléphone composé
Select or enter the required call destination (external number, short-code number, internal number of the individual phone, internal number of the group).
Note: The call destination is first entered identically for all configurations. It can be changed later.Note: If a door call should also be executed via VoIP accounts or GSM gateways, in any case the external number must be entered with the corresponding city code, even if it is the local prefix.Note: To create further configurations for a door terminal, open the page Périphériques > Interphones and click Configurer in the line of the corresponding door terminal.Invite SIP
Enter the SIP invites which the connected door terminal uses as signal. (Possible entries: Digits and the characters * and #).
Note: If default values have already been entered in the device template, the entry fields will not be displayed. If you want to change these values, click Experts.