Buch1 > Using the Configuration Manager > Matériel > Configuration du port > Settings of the Ports > 2BRI
2BRI
Proceed as follows:
•Using the Configuration Manager (Matériel > Configuration du port)
*Note: If the settings for the module are marked in red, the module is selected but not inserted.
*Note: The numbers under Port correspond to the numbers used on the board.
Utilisation
Set the use of the ISDN ports.
libre
Port is not used and port is not taken into account for the calculation of the total number of existing ports/call channels.
internal S0
Port is used as internal S0 port.
internal UP0
Port is used as internal UP0 port.
externe
Port is used as external port.
Type de connexion
The connection type for the ISDN connection that the network provider has provided for the NT needs to be configured for the external S 0 port.
*Note: No selection of the connection type is possible for internal S 0 ports. They are fixed on PTMP connection.
Liasion Point-Multi-Point (PMP)
ISDN PTMP connection (Point-to-Multipoint) with up to 10 multiple subscriber numbers (MSNs).
Connexion PTP
ISDN PTP connection (Point-to-Point) with a PBX base number and Direct Dial In numbers (DDI numbers).