Présentation du numéro de téléphone

Buch1 > Using the Configuration Manager > Réseaux publics > RNIS > Expert Configuration of the PTMP Connection > Présentation du numéro de téléphone

Important: The expert settings for the ISDN connection are settings that should only be changed if e. g. country or provider-specific particularities make it absolutely necessary.

Proceed as follows:

•Using the Configuration Manager (Réseaux publics > RNIS > Liasion Point-Multi-Point (PMP) > Paramètres expert > Configurer)

Requirements:

•Configured PTMP connection

OUTGOING CALLS (CDPN)

CDPN of type

CDPN in format

Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.

Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.

Select the phone number format dependent on the phone number type.

CDPN receives prefix

Enter a prefix (*, #, 0-9; max. 4 digits) to send possibly necessary control commands to the provider.

CDPN receives postfix

Enter a postfix (*, #, 0-9; max. 4 digits) to send possibly necessary control commands to the provider.

CLIR

The selection of the available options for this function is provider-specific.

Infoélément

The called party number is sent as info element.

Préfixe de composition

The called party number is sent as keypad sequence. The dial prefix is provider-specific (e. g. #31).

OUTGOING CALLS (CGPN)

Propre numéro de téléphone de type

Propre numéro de téléphone au format

Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.

Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.

Select the phone number format dependent on the phone number type.

Signaler les types d’appel LLC comme

Audio 3 kHz

Selection for fax devices and analogue modems (e. g. alarm systems and emergency devices).

Voix

The exchange line compresses the channel. The transferred amout of data is reduced, whereby the sound quality on the receive side could be slightly changed.

Identique au abonné

The LLC call type is adopted from the subscriber.

automatique

Audio 3kHz is preferably used. At problems with the destination, it is automatically switched to Speech.

Identité en départ

The called party sees a customer-defined phone number instead of a phone number assgined by the network provider. The customer-defined number is not checked by the exchange line for correctness.

CLIP no screening from type

Identité en départ au format

Requirements:

•Enabled Identité en départ for incmong calls

Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.

Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.

Select the phone number format dependent on the phone number type.

CONNECTED CALLS (COPN)

Connected phone number of type

Numéro de téléphone associé au format

Note: The settings ‚of type‘ and ‚in format‘ build a group which means both settings must be made in dependency to each other.

Select the type (Unknown, Subscriber, National, International) how the phone number shall be transferred.

Select the phone number format dependent on the phone number type.

Codage spécial du numéro de téléphone associé

Par défaut

Must be selected in all countries except for Spain.

Espagne

Must be selected in Spain.

Note: Depending on the provider, in Spain the special encoding Par défaut might as well be selected.

FOR INCOMING CALLS

Waiting for direct dialling (4..8 sec)

Note: This is a country-specific setting (only relevant in Austria).

Enter a waiting time until the direct dialling (between 4 and 8 seconds). This is useful when the phone number is first transferred incompletely.