Ringer tones
The PBX supports different ringtones for signalling calls on the internal subscribers. They can be used for example to differentiate internal calls, external calls via different external numbers, door calls and alarm calls using the ringtone.
Note: Signalling is carried out by analogue devices as described (depending on the end device used).Note: Some end devices (e.g., ISDN phones and wireless, analogue phones) generate their own call tone/ringtone. For more information, refer to the description of your end device.Note: On some system phones the ringtones can be configured based on the call type or the phone numbers (optional, see phone manual).Ringtones are displayed on analogue phones as follows:
a1 x long
b3 x short
c1st special tone
d2nd special tone
e3rd special tone
f4th special tone
g5th special tone
h6th special tone
iAlarm
Configuration procedure:
•Configuring the ringing tone for external calls.
−Using the Configuration Manager (on the pages that follow)
−Réseaux publics > RNIS > Liasion Point-Multi-Point (PMP)
−Réseaux publics > RNIS > Numéro Principal d’abonnement/Faisceau (NDI) > Configurer
−Réseaux publics > RNIS > Numéros Directs (SDA) en PTP
−Réseaux publics > RNIS > Additional PTP connection numbers
−Réseaux publics > VoIP > Comptes > Configurer
•Configuring the ringing tone for internal calls.
−Using the Configuration Manager (Abonnés (Abo) > Propriétés > Paramètres analogiques page)
•Configuring the ringing tone for door calls.
−Using the Configuration Manager (Périphériques > Interphones page)
•Configuring the ringer frequency.
−Using the Configuration Manager (Abonnés (Abo) > Tous les abonnés page)
Note: For alarm calls the ringing tone is permanently set as Alarme.