Settings
Proceed as follows:
•Separately for subscribers
•Using the Configuration Manager
•Subscriber-related (Abonnés (Abo) > Propriétés)
Abonné
Select the subscriber you want to display/configure.
•Function-related (Abonnés (Abo) > Synthèse des fonctions)
Configurer
Opens the configuration of the single function for all subscribers.
Important: The settings done are only valid on the condition that they are not overridden by a profile. The simultaneous display takes place only on page Abonnés (Abo) > Propriétés under Surmodulé par le biais du profil dans la configuration.
Note:[Name configuration] ...: In the displayed configuration, the function is overridden by the displayed setting. Configuration using the Configuration Manager (Abonnés (Abo) > Profils > ...)Note:faculté libre: The function is currently not overridden by a profile.Note:(non commandé par le profil): The function can not be overridden by a profile.Appel bébé/personne âgée | Numéro de téléphone composé
Requirements:
•Subscriber is not a VoIP phone or VoIP system phone
After picking up the receiver, the phone number entered is automatically dialled.
Facteur de décompte
Indicates the value used to convert the subscriber's phone costs. This factor is used to multiply the charges transmitted from the network provider or the calculated charges. The phone costs calculated in this way are used in the call data list.
Demande préalable et surveillance de l’interception d’appel
Requirements:
•VoIP end device which can evaluate the available information by BLF
•VoIP phone from another manufacturer: Pack confort SIP / Pack confort SIP brand plus enabled (optional, see Activation)
All information about the calls of the subscriber is available for evaluation by BLF.
A preliminary pick-up query allows a subscriber, even before a pick-up, to see which caller he would be picking up.
Note: When switched off, no phone numbers of the subscriber‘s calls will be transmitted by BLF.Accès privé à la ligne sans PIN
Requirements:
•Differently configurable functions for private and business calls activated
−Using the Configuration Manager (Abonnés (Abo) > Tous les abonnés)
The subscriber is able to make private calls without entering a user PIN but only on his own phone.
Note: When authorisation is granted for initiating personal calls without a PIN, there is no protection against misuse by other internal users.Signalling by tones
Tonalité interne
Specifies which tone the user hears after picking up the receiver or after pressing the flash or query key if a line is available. It is then possible to dial a phone number.
Busy tone at end of call
The PBX generates a busy signal at the end of the call (e. g. the communication partner hangs up).
For some answering machines, this busy signal does not interrupt a recording. These answering machines cannot differentiate between the busy signal and speech. For such cases, the busy signal can be disabled.
Tonalité spéciale si transf., Ne pas déranger, appel bébé
The PBX generates a special dial tone to bring attention to a configured function (do-not-disturb, baby call (connection without dialling)).
Tonalité spéciale si mémoire de données d’appels pleine
the PBX generates a special dial tone to bring attention that call data memory has reached capacity.
Special functions
Indicatif
Requirements:
•System-wide automatic exchange line request switched off and entered exchange line access number
−Using the Configuration Manager (Réseaux publics > Indicatif)
Poste interne
For external calls, the prefix of the Exchange line access number is required.
Direct exchange device
When picking up the receiver, an external line is requested instantly. For internal calls, the prefix ** is required.
Indicatif automatique
The PBX automatically distinguishes between internal and external numbers with the analysis of the digit sequence and the adjustment of the dialled phone number and the internal dial plan.
Note: The selection Indicatif automatique is only available for IP DECT phones as well as COMfortel 1200 IP and COMfortel C-400. If you want to use this function for other phones, you must switch on the system-wide automatic exchange line request (Réseaux publics > Indicatif).Note: The behaviour of the IP system phones when picking up the receiver, depends on the default account selection (see manual of the phone). For some IP system phones, the default account can be determined by the settings for the exchange line request of the PBX.Transfert d’appel
This is reasonable for the pick-up of calls to answering machines, fax machines or modems.
If call take-over is enabled for an answering machine and this answering machine takes a call earlier than a subscriber, the subscriber may take this call back from the answering machine. The answering machine will receive a busy signal then.
Aucune
Calls of this subscriber may not be taken over.
Global
Calls of this subscriber may be taken over by every other phone.
Groupe(s)
Calls of this subscriber may be taken over by members of groups the subscriber is also member of. It does not make any difference if the subscriber is currently logged-in or -out.
InterCom (announcement/hands-free calling)
Requirements:
•System phone that supports InterCom (optional, see phone manual)
The subscriber takes automatically an InterCom call directed to him.
Transmission du nom d’affichage
Requirements:
•VoIP device with entered display name
The entered display name will be transmitted when the subscriber makes an internal call and displayed on the called phone.
Note: When switched off, the subscriber name entered in the PBX will be displayed on the called phone when the subscriber makes an internal call. If the phone number of the subscriber has been entered in the local phone book of the called phone, the subscriber name is suppressed by the phone book entry.Dispositif d’alarme
Requirements:
•System phone that supports signalling for alarm devices (optional, see phone manual)
An internal call of the subscriber is signaled as an alarm call on a system phone.