Proceed as follows:

Internal number, freely selectable from the numbers in the internal phone number supply. This number can be called directly by an internal subscriber. When put together with the numbers of the door bell buttons, this creates 3 to 4-digit phone numbers. (Select Périphériques > Assistant de périphériques > Nouvelle)

Freely selectable name. This name is used to identify the door terminal within the PBX and the connected system phones. The name can also be transferred to the VoIP end devices via LDAP server.

Module and port to which the device that can be used as door terminal (e. g. a TFS Universal-Plus) is connected.

Opens the configuration of the door terminal.

Requirements:

A relay is assigned to the door station with the operating mode Parler,Gâche or Éclairage.

A relay used for this purpose can, for example, be part of a connected door terminal or be connected to the same port (a/b Switching Module). Alternatively, it is also possible to use a relay for the door function which is part of another connected device (e.g. an IP switch relay). In this case it must first be created in the configuration of the PBX as part of this other device and then be assigned to the door terminal. It then remains part of this other device in the configuration of the PBX, but takes over the selected door function for the door terminal.

Périphériques > Relais (actionneurs): If matching relays are already set up on the page, a list field appears. Select one of the existing relays in the list field and confirm with .

If you do not want to use any of the existing relays, select Nouveau relaisIn the list field (cancels the operation). Assign a freely selectable relay name an confirm with Ok.

Link to page Périphériques > Relais (actionneurs)

Deletes the relay or opens the configuration of the relay.

Requirements:

The door bell buttons of a door terminal can be used to initiate configuration-dependent internal and external door calls. For this purpose, the door bell buttons must be created as switch inputs in the PBX. They must then be allocated call destinations and assigned to the door terminal. To detect a door call, e.g. because a door bell button has been pressed, the PBX needs to know which DTMF sequence or which SIP invite the connected device sends in this case (see manual and settings of the device in question).

Door Calls + Relays: Click on the lower in the line of the corresponding door terminal.

Entrée: Enter the designation for the switch input.

Séquence DTMF(analogue door terminals)/Invite SIP(VoIP door terminals): Enter values. To detect that the alarm has been triggered, e. g. because a door bell button has been pressed, the PBX needs to know which DTMF sequence or which SIP invite the connected device sends in this case (see manual and settings of the device in question). The DTMF sequence or the SIP invite usually is the phone number assigned to the door bell button within the door terminal.

List fieldNuméro de téléphone composé: Select the desired call destination.

alternative:

Select Saisir le numéro de téléphone composé and enter the desired call destination under Numéro de téléphone composé

Possible entries:

Click Ok.

Deletes the switch input or opens the configuration of the door call.