Call Distribution for
Proceed as follows:
• Separately for configurations
• Separately for external connections
• Using the Configuration Manager (page Réseaux publics > Acheminement des appels)
Note: External numbers that are required as Call Through numbers (Fonctions > DISA (Call Through)) are not allowed to be used in call distribution. Note: In order for a subscriber to signal incoming external calls, it needs at least Discrimination (business) Entrants uniquement, avec appel d’urgence (Abonnés (Abo) > Propriétés > Paramètres de ligne). Note: An internal destination can be assigned to an external number. Internal destinations can be subscribers, groups, Voice mail and fax boxes or the automatic reception functions. Note: If several subscribers ring simultaneously, they are grouped.CALL DISTRIBUTION FOR
Select the connections to be displayed/configured.
A separate call distribution is set for each external connection. A single connection as is defined here as:
• A PTMP connection (fixed network or GSM)
• A single PTP connection (fixed network or GSM)
• A bundled PTP connection made up of several S0 connections with the same PBX base numbers and the same extensions block
• An S2M connection
• An analogue connection
• A VoIP account
...ISDN PTMP connections
...VoIP PTMP connections
No de téléphone interne | Nom
Réversion
The caller is transferred to the fallback function.
Internal number: The caller will be transferred to the selected internal number (subscriber, group, voice mail/fax box or automatic reception).
Note: External numbers, e.g., those used as remote switching/programming numbers or call through numbers, may not be used in the call distribution....ISDN PTP connections ...VoIP PTP connections
No de téléphone interne | Nom
For a PTP connection without linear call distribution or for extensions differing from linear call distribution, the internal destinations must be selected.
linear/fallback
The caller will be transferred to the internal number similar to the DDI. If this phone number is not configured in the PBX, the fallback function will be used.
Rejeter l’appel
The caller hears the busy signal.
Internal number: The caller will be transferred to the selected internal number (subscriber, group, voice mail/fax box or automatic reception).
Note: External numbers, e.g., those used as remote switching/programming numbers or call through numbers, may not be used in the call distribution.