Ringtones
The PBX supports different ringtones for signalling calls on the internal subscribers. They can be used for example to differentiate internal calls, external calls via different external numbers, door calls and alarm calls using the ringtone.
Note: Signalling is carried out by analogue devices as described (depending on the end device used). Note: Some end devices (e.g., ISDN phones and wireless, analogue phones) generate their own call tone/ringtone. For more information, refer to the description of your end device. Note: On some system phones the ringtones can be configured based on the call type or the phone numbers (optional, see phone manual).Ringtones are displayed on analogue phones as follows:
1 x plus long: 1 long tone (1 second), 4 second pause, ...
3 x plus court: 3 double tones, approx. 1 second pause, ...
1. Tonalité spéciale: Uninterrupted pulsing
2. Tonalité spéciale: Continually repeating double tones (3 double tones in 5 seconds)
3. Tonalité spéciale: 1 double tone, approx. 4 second pause, ...
4. Tonalité spéciale: 2 short tones, approx. 4 second pause, ...
5. Tonalité spéciale: 2 long tones, approx. 3 second pause, ...
6. Tonalité spéciale: 1 short and 1 long tone, approx. 4 second pause, ...
Alarme: Uninterrupted pulsing
Proceed as follows for configuration:
• Configuring the ringing tone for external calls.
-Using the Configuration Manager (on the following pages)
-Réseaux publics > RNIS > Liasion Point-Multi-Point (PMP)
-Réseaux publics > RNIS > Numéro Principal d’abonnement/Faisceau (NDI) > Configurer
-Réseaux publics > RNIS > Numéros Directs (SDA) en PTP
-Réseaux publics > RNIS > Additional PBX base numbers
-Réseaux publics > VoIP > Comptes
• Configuring the ringing tone for internal calls.
-Using the Configuration Manager (page Abonnés (Abo) > Propriétés > Paramètres analogiques)
• Configuring the ringing tone for door calls.
-Using the Configuration Manager (page Périphériques > Interphones)
• Configuring the ringer frequency.
-Using the Configuration Manager (page Abonnés (Abo) > Tous les abonnés)
Note: For alarm calls the ringing tone is permanently set as Alarme.