Modem/Fax Call Distribution
Proceed as follows:
• Separately for configurations
• Separately for external connections
• Using the Configuration Manager (page Réseaux publics > Acheminement des appels)
Acheminement des appels pour
Select the connections to be displayed/configured.
actif
Requirements:
• Configured connection type analogue connections
If the active modem/fax call distribution is enabled, the PBX automatically accepts every external call to the corresponding phone number. Using the dial tones, it attempts to determine whether the incoming call is from a fax machine or from a modem. If the corresponding dial tones are identified within the detection time frame configured, the call is forwarded to the selected internal number (subscriber, group, voice mail/fax box).
Aucune reconnaissance
There is no automatic modem/fax call distribution.
Fax
The active fax call distribution is enabled.
Fax et modem
The active modem/fax call distribution is enabled.
Passif
Requirements:
• Configured connection type analogue connections
An external call is transferred to an internal subscriber via the normal call distribution. If the user accepts the call and ends it within the configured detection time frame, the call is automatically transferred to the internal destination selected in the last column (subscriber, group, fax box).
Note: If you have selected the option Fax or Fax et modem in the actif list field, the setting for the Passif check box will be ignored and active modem/fax call distribution will be enabled. Note: The setting in the Durée de reconnaissance list field is not relevant for passive modem/fax call distribution.Durée de reconnaissance
Requirements:
• Configured connection type analogue connections
Time interval in seconds that the PBX has for making the identification of fax or modem.
Internal no. | name
Requirements:
• Configured connection type analogue connections
Réversion
The caller is transferred to the fallback function.
Internal number: The caller will be transferred to the selected internal number (subscriber, group, fax box.
Réversion après délai après
Requirements:
• Selected fallback number (see fallback)
All calls which have not been answered will be redirected after the configured time.
Note: The fallback time is the addition of the longest waiting time for the Call Forwarding on no reply and the seconds configured in après. The longest waiting time will be determined by a comparison of the Delay time for CF on no reply in the PBX and the Temps d’attente pour transf. si non-réponse.Acheminement des appels linéaire (externe = interne)
Requirements:
• Configured connection type PTP connection
A 1:1 assignment for the extensions is made automatically for internal numbers and external extensions that are matching the extensions block.