Switch input+Relay
Relay
Requirements:
•Relay/actuator (optional, see Technical Data in the Instructions)
•Created device (e. g. door terminal, IP switch relay) whose part the relay is
A relay with the operating mode Alarm, which is used to enable e. g. a siren when the alarm has been triggered, is assigned to the alarm.
In the list field, select one of the existing relays and click 
.
.If you do not want to use any of the existing relays, select New relay in the list field (
cancels the operation). Enter a freely selectable name for the relay and select the device as whose part the relay is to be created in the Add to list field. Click Ok.
cancels the operation). Enter a freely selectable name for the relay and select the device as whose part the relay is to be created in the Add to list field. Click Ok.
Note: The relay remains part of this other device (e. g. door terminal, IP switch relay) in the configuration of the PBX, but takes over the selected alarm function for the alarm.Note: For a detailed description of the operating modes, refer to .
Link to the page Devices > Relays (actuators)
Deletes the relay or opens the configuration of the relay.
Switch input
Requirements:
•Switch input (optional, see Technical Data in the Instructions)
•Created device (e. g. a door terminal) whose part the switch input is (e. g. a still free door bell button)
A switch input that can be used to trigger the alarm, is assigned to the alarm.
In the list field, select one of the existing switch inputs and click .
.If you do not want to use any of the existing switch inputs, select New switch input in the list field ( cancels the operation). Enter a freely selectable name for the switch input and select the device as whose part the switch input is to be created in the Add to list field.
cancels the operation). Enter a freely selectable name for the switch input and select the device as whose part the switch input is to be created in the Add to list field.Enter a value under DTMF sequence (for analogue door terminals) or SIP invite (for VoIP door terminals). To detect that the alarm has been triggered, e. g. because a door bell button has been pressed, the PBX needs to know which DTMF sequence or which SIP invite the connected device sends in this case (see manual and settings of the device in question). The DTMF sequence or the SIP invite usually is the phone number assigned to the door bell button within the door terminal.
Click Ok.
Note: The switch input remains part of this other device (e. g. door terminal) in the configuration of the PBX, but takes over the selected alarm function for the alarm.Deletes the switch input or opens the configuration of the switch input.