Analogue Connection
Proceed as follows:
Separately for analogue ports
Using the Configuration Manager (Public switched tel. networks > Analogue > Phone numbers)
Requirements:
External analogue port (optional, see Technical Data in the Instructions)
ANALOGUE CONNECTION
Select the analogue connection to be displayed/configured.
Name of the analogue connection
For identification of the port within the PBX.
GSM
The analogue port supports the GSM gateway connected to it. Any phone number can be used for the analogue port. It must be entered in the PBX and GSM gateway configurations.
*Note: GSM gateways accept external phone calls automatically. This may cause call charges for the caller, even if no-one picks up the phone at the internal destination.
*Note: If the PBX is not connected to the land line, outgoing external calls can only be accepted via a targeted exchange line access using the phone numbers entered on the Routing > VoIP/GSM Routing > Exception numbers page (and the corresponding accesses, also configured on this page) or via a configured preferred exchange line (exchange line settings for subscribers or groups).
LCR
Requirements:
Network provider must support the dial-around service
Configured prefixes (country prefix and local area code)
Configured LCR (see LCR)
The analogue connection is used for LCR calls.
*Note: LCR must be disabled if the network provider does not support LCR.
*Note: LCR cannot be enabled on an external port to which a GSM gateway is connected.
*Note: However, you can always perform LCR manually by dialling a provider area code prefix if the network provider supports the dial-around service.
Exchange line has emergency call ability
Requirements:
The corresponding connection must allow emergency calls
This exchange line can be used for emergency calls.
*Note: When switched off, this exchange line cannot be used for emergency calls. You will hear the announcement, "This phone does not allow emergency calls. Please use an alternative."
*Note: If you have updated your firmware from Version 6.4 to 6.6, the phone allows emergency calls by default.
Expert configuration > Configure
Opens the expert configuration.