Settings
Proceed as follows:
Using the Configuration Manager (Fonctions > LAN-TAPI)
IP address or URL of the TSP client
If a TSP client is successfully registered for the first time, the IP address or URL of the device on which the TSP client is installed is entered automatically.
Port réseau du serveur TAPI (1024-65535)
Port on the PBX which is used for communications with the TAPI server.
*Note: The new configuration will only become effective after the PBX or the TAPI server has been restarted.
Mot de passe pour la connexion réseau du serveur TAPI
Freely selectable password that consists of 8 to 32 characters containing digits, letters (upper and lower case, but no German umlauts and ß) and special characters- _ . ! ~ * ' ( ) & = + $ ,. The password is used for communications with the TAPI server.
*Notices:
To change current PINs and passwords, click on Attribuer le PIN et le mot de passe.
Redémarrer le serveur TAPI | Redémarrage
Restarts the TAPI server.
Utiliser PBX Call Assist
Requirements:
PBX Call Assist function enabled (optional, see Activation)
PBX Call Assist is a CTI software available from Auerswald. Its use must be switched on in the PBX.
All available TAPI lines are administrated by the corresponding server software UCServer. Other TAPI applications cannot be used in parallel.
Further steps:
Install the server and client software. You will find the installation files on the Internet (see Auerswald Service Portal).