Settings – Configuration Manager > Abonnés (Abo) > Numéros de téléphone > Management Subscriber
Management Subscriber
Proceed as follows:
• Using the Configuration Manager (page Abonnés (Abo) > Numéros de téléphone)
Numéro de téléphone
This is an internal number. You can select any of the numbers in the internal supply of phone numbers. This number is then used for distributing calls and can be called directly by another internal subscriber. (Select  Nouveau to enter.)
* Note: A number cannot be allocated twice.
* Note: Using numbers with few digits (two- or three-digit numbers) inevitably restricts the possible supply of numbers that require more digits. For example, if the phone number 12 is assigned, the phone numbers 120 to 129 and 1200 to 1299 are no longer available.
* Note: The default exchange line access number on the PBX is 0 in the factory settings. However, this can be changed. Note that changing the exchange line access number restricts the phone numbering plan.
* Note: The internal number entered here needs to be entered in the ISDN device or in the system phone as the (first) MSN. Also on an ISDN device, make sure that the phone number is transmitted to the PBX.
Nom
Freely selectable name. This name is used to identify the subscriber within the PBX and the connected system phones. The name can also be transferred to the VoIP end devices via LDAP server.
Module > Port
Module and port to which the end device (e. g. phone) is connected.
Type de périphérique
Device type depending on the end device connected.
Analogue end devices
Téléphone
analogue phone, analogue modem
Répondeur
analogue answering machine
Fax
analogue fax machine
Interphone
analogue door terminal, selection deletes the subscriber and opens Périphériques > Assistant de périphériques for configuration of a door terminal
Interface de paging
analogue announcement output, selection deletes the subscriber and opens Périphériques > Assistant de périphériques for configuration of an announcement output


ISDN end devices
Téléphone dédié RNIS
System phone 1200/1400/1600/2600
Téléphone RNIS
ISDN phone in compliance with the Euro ISDN Standard (DSS1)
ISDN PC controller
ISDN PC controller in compliance with the Euro ISDN Standard (DSS1)
Fax
ISDN fax machine in compliance with the Euro ISDN Standard (DSS1)


VoIP end devices
COMfortel IP
COMfortel 1400 IP, COMfortel 2600 IP, COMfortel 3200, COMfortel 3500, COMfortel 3600 IP
COMfortel 1200 IP
COMfortel 1200 IP
Téléphone VoIP par défaut
Standard VoIP end device (SIP) from other manufacturers, soft phone (SIP)
Combiné pour COMfortel WS-IP
Handset (e.g., COMfortel M-100/200/210/300/310) on a COMfortel WS-400 IP or COMfortel WS-650 IP
Handset on COMfortel WS-500
Handset COMfortel M-510/520/530 on a COMfortel WS-500S or WS-500M
COMfortel C-400
Conference phone COMfortel C-400
Interphone
VoIP door terminal, selection deletes the subscriber and opens Périphériques > Assistant de périphériques for configuration of a door terminal
Propriété > Configurer
Opens the configuration of the subscriber.
Filtres
The list of subscribers is filtered according to the entered or selected value for Phone number, Name or Module.
 Nouveau
Adds a new subscriber. You must then make the settings for this new subscriber.
* Further help under Add Subscriber
 Supprimer
Entries marked in the list are deleted.
* Note: If a handset of the device type COMfortel M-5x0 is deleted as a subscriber, this is also removed in the base station in which it was configured.