Notes and requirements for initial commissioning

Help > COMtrexx hardware variants > COMtrexx Next > Initial Commissioning COMtrexx Next > Notes and requirements for initial commissioning

Note: The description applies from firmware version 2.2.

Web interface

The setup is made using the web interface of the COMtrexx.

The following recommendations apply to the web interface:

•PC with a recommended screen resolution of 1280 × 1024 pixel

•Browsers: Mozilla Firefox, Google Chrome (current version in each case)

You can reach the COMtrexx via:

•https://comtrexx.local, prerequisite: only one COMtrexx in the network

•https://169.254.1.240 (permanent IP address from the APIPA address range)

•via the IP address allocated by the DHCP server

Note: During the initial setup, the IP address must be assigned via DHCP (standard setting of most routers).

Important: If you would like to integrate the COMtrexx into an existing network, please contact the system administrator responsible for this. Making changes to an existing network may cause considerable malfunctions.

Licences

The following clearances must be made during commissioning:

•Initialisation in the CIC (COMtrexx Initialisation Center), prerequisite: Single Sign-On (SSO) access

•System activation, purchase in the Shop, redeem in the Voucher Center

•user licenses, purchase from distributor, redeem in the Voucher Center

Note: For a regular verification with the CIC and the Voucher Center, the COMtrexx requires Internet access. Without this synchronisation, the COMtrexx is set back to its initial state.