Installing TAPI driver (TSP)
The PBX has to be connected to a TCP/IP network using a server PC. The TAPI driver (TSP) belonging to the PBX has to be installed on this server PC.
Important: If you are integrating the LAN TAPI into an existing network, contact the system administrator responsible for this. Making changes to an existing network may cause considerable malfunctions.
Requirements:
•A current installation file (Setup.exe) saved on a data storage device (PC)
•Server PC, that meets one of the following requirements:
−Windows 7 (32-/64-Bit)
−Windows Server 2008 and Windows Server 2008 R2
−Windows 8/8.1 (32-/64-Bit)
−Windows 10 (32-/64-Bit)
−Windows Server 2012 and Windows Server 2012 R2
−Windows Server 2016
−Windows Server 2019
1.Start the installation file (Setup.exe) on the server PC.
This starts the TAPI driver installation.
2.Proceed with the installation by clicking on Continue.
3.In the entry field IP address of the PBX enter the PBX's IP address.
4.In the entry field Port enter the network port of the TAPI server.
5.Enter into the entry fields Password and Repeat password the password for the network connection of the TAPI server
6.Click OK.
7.Click Close.
8.Restart the PC.