Web server configuration
HTTP-Port
Port 80 is used for accessing the Web server by default. The address can thus be entered as follows: http://192.168.55.13, for example. Only when accessing via Ethernet the value (e.g. 8081 instead of 80) has to be entered when modifying the port (e.g. http://192.168.55.13:8081).
You can view the ports already configured under Administration > Network > Ports.
Caution: For security reasons, a port change is particularly required if the PBX is meant to be accessed over the Internet (over a router and a permanent IP address).HTTPS port
Port 443 is used for accessing the web server by default. The address can thus be entered as follows: http://192.168.55.13, for example. Only when accessing via Ethernet the value (e.g. 4432 instead of 443) has to be entered when modifying the port (e.g. https://192.168.55.13:8081).
You can view the ports already configured under Administration > Network > Ports.
Caution: For security reasons, a port change is particularly required if the PBX is meant to be accessed over the Internet (over a router and a permanent IP address). Certificate
All properties of the certificate are displayed. The certificate can be exported and saved to the (PC) data storage device.
Force HTTPS connection
The connection is carried out via HTTPS to secure the access to the web interface. An access via HTTP will be forwarded to HTTPS.
Note: When switched off, the connection is carried out via HTTP.Access only within local network
For increased security, the web server access is limited to the local network.
API access only within local network
For increased security, the API access is limited to the local network.
Forced logout if no action happens after
Specifies after how many minutes a user is automatically logged out of the web interface if no action has been taken in the web interface within the configured time period.