Voice Mailboxes on the PBX > Voice Mailbox > Function Key for Remote Access
Function Key for Remote Access
Press the key generally assigned for VMB remote access to enable, disable or switch the function for remotely accessing a voice mailbox.
Press the key specifically assigned for VMB remote access to enable, disable or toggle the remote access function.
In addition, when functions are assigned on the first key level, the status of the function is indicated by the corresponding LED.
 
LED signalling on the key:
green
Voice mailbox remote access is enabled (for a defined assignment).
off
Remote access is disabled.
The function key has no defined assignment.
Proceed as follows by assigning the function key:
•
Using the Configuration Manager by selecting VMB remote access
•
Using the telephone by selecting VMB remote access
Notes:
For further information about the general procedures when assigning function keys, see Function Keys.
Additional settings for this function key are described in the following.
 
 
Operation 
decide each time a key is pressed
 
Account 
Selection of the system telephony account
 
VMB number 
Enter the phone number of the voice mailbox which is to be switched with the function key
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information V08 12/2020