S2M Ports

Buch1 > Using the Configuration Manager > Hardware > Port configuration > Settings of the Ports > S2M Ports

S2M Ports

Proceed as follows:

•Using the Configuration Manager (Hardware > Port configuration)

Note: If the settings for the module are marked in red, the module is selected but not inserted.

Note: The numbers under Port correspond to the numbers used on the board.

B channel assignment type

Select the corresponding option ordered from the network provider and given in the order confirmation:

Global

The B channels are not permanently assigned.

Targeted

The B channels are assigned in selected mode.

Level adaption

In exceptional cases it may be necessary to switch level adaption on (if a very long connection line between the NTPM and the PBX causes problems, e. g. interruption of calls).

first usable B channel

Select the first B channel that was provided by your network provider or that was provided as the first one for the PBX due to restricted conditions.

incoming channels

Select the number or B channels that are available for incoming calls.

outgoing channels

Select the number of B channels which are available for outgoing calls.

incoming/outgoing channels

Select the number of B channels which are available in both directions.